We traveled on Wednesday to the house in Kansas City to meet them at 5pm. We set out early which was just as well as we were held up for some time because of an accident. Always hate to see those. There were police cars, ambulances and fire trucks all with sirens going so it was pretty bad. We arrived dead on 5pm.
There was some difficulty opening it up which was a bit unnerving but the guy got it open and the machine all seemed to be intact, even the shuttle and a bobbin were still in it. The wheel turned and the spindle went up and down. The back lever raised and lowered the foot. The belt was broken which was expected from the pictures. The treadle peddle turned the treadle wheel. From these observations I was hopeful that I could get it running.
I paid the man the $75 and he lifted into our van for us and tethered it down with seat belts and some bungy cords. We drove home in the dark which I don't like but it was worth it.
We were totally exhausted by the time we got back home so I just left it in the back of the van until yesterday morning,
We unloaded it and got it into the house. I had the same difficulty with getting it open. I finally managed it and had chance to look it all over.
I printed up the manual which I found online and found out how to take the machine off the base. (Amazing how easy things are when you know how!)
The problem with it opening was a piece of metal on the inside which it slides up when the top is opened. It had come loose at the bottom so was above the level of the piece of the frame that goes over it so was getting caught preventing the lid to open. There is a chain that is attached to the lid and to the mechanism underneath that raises and lowers the machine. It is really quite clever how it works.
I secured it down with a screw and it works without the machine in it, the test will be when I put the machine back in it. But first it has to be cleaned and oiled.
I think that this had been a problem for some time because the back of the frame where the machine sits was cracked as I suspect people had strained to get it open.
We discussed how to remedy this as the frame was weakened by the crack and we decided that a piece of metal underneath with two holes in for the hinges that connect the machine to the frame to go through should remedy it. Also I will glue the wood to strengthen it too. I was looking underneath this morning to see what size of metal we would need and it looks like someone had tried to fix it before as there is a small strip of metal attached with screws which span the crack. This has stopped the frame from actually breaking completely but I believe our plan will be even better.
| The piece of metal with the indentation is the repair that someone had done previously. The other piece of metal is where the raising mechanism is attached so has to remain intact. |
The top of the lid needs sanding right down and re-staining and sealing and a few other places need some work but I don't think I will have to rub it all down which is a blessing.
I found some excellent links on the internet and some great videos on how to clean and oil these old machines. I need to get some metal cleaner and polish. The metal is pretty dull and underneath the rods have dried gungy oil on them so that all needs to be cleaned off. How on earth did we manage before the internet?..............but we did.
I really need to get it out into the shop to work on it but that means I would be out there for hours at a time and my poor husband and the dogs would be neglected as I really immerse myself into doing this type of thing.
| The bobbin winder works and I will give it a good cleaning |
I am bidding on a spare shuttle on ebay and have ordered a new belt. I will also order some new bobbins.
To say I am excited is an understatement. I am so happy, happy happy!







